User Manual

www.SereneLifeHome.com8
CONTROL PANEL
1. Timer: 24h timer setup, press this key to set ON/OFF time of the dehumidier,
the setting range is 1-24h, every press adjusts one hour. If you want to cancel
timer setup, press twice continuously after conrmation of setting time.
2. Inside Drying Key: Press this key to start drying procedure in the dehumidier,
this can prevent mold inside the dehumidier due to damp. The whole drying
procedure needs approximate 1h. Press this key again to cancel the drying
function in the dehumidier, and to recover to running state before starting
drying.
3. Fan Speed: Under AUTO or CONTINUOUS mode, adjust the fan speed, HIGH
and LOW can be circularly selected.
4. LCD Display: In AUTO, CONTINUOUS AND DRYING modes, etc., this indicator
displays room humidity. When it is set in AUTO mode, this indicator shows the
set humidity; and displays the set time in timer state, % represents percentage
of humidity.
5. Humidity Setting: Once this key is pressed, the humidity is displayed circularly
in the range of 30%-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%, and the
humidity setting is only valid in AUTO mode.
6. Mode: During startup or timer startup press this key to select AUTO, CONTINUOUS
and DRYING modes, etc., and the indicator lamp corresponding to the selected
mode is on. Press and hold (3 seconds) the Mode button to activate the child
lock. Repeat the process to turn the child lock o.
7. On/o key: Press this key to turn on or turn o the dehumidier.
1 2 3 4 5 6 7