User Manual

www.SereneLifeHome.com
10
Use the Remote Controller
WARNING: ADULT OPERATING REQUIRED!
The remote control has precedence over foot pedal operation.
(The foot pedal won’t work while you operate the Remote Controller)
1. Connect button (build connection): Lift the battery compartment door on
the back of the controller and insert two AAA (LR03) batteries.
NOTE: Batteries not included. Refer to the battery information on page 3.
Press and hold the connect button for 3 seconds, the indicators ashes, means
that the remote controller is in the connected state. Then power ON the product:
• The indicators goes to long bright, means the connection successful.
• If indicator no response, means the connection failed. Turn o the remote
controller (by removing the batteries) and the product. And try again.
2. Brake button: Press the button to stop the vehicle, press it again to release
the brake.
Note:
• Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
• After replacing the batteries of the remote controller, please rebuild the
connection. (step 1)
Connect button
Forward button
Left turning
button
Right turning
button
Brake button
Indicators
Reverse button