by
OPERATING MODE The sober design of our product easily integrates with all interiors and allows you to keep a watchful eye on your babies. Communication between transmitter and receiver through radio waves at a max distance of 260 m (distance in open field). The digital connection provides transmission without interference. The camera is equipped with infrared LEDs that automatically switch on in case of insufficient light conditions.
PACKAGE CONTENT 1 Monitor X1 2 Camera X1 3 Power adapter X2 DESCRIPTION 1 LCD display 2 LED for in Charging. 3 LED power indicator 4 Key Power On/Off 5 Key menu / OK 6 Key Return - undo. 7 Key volume – 8 Key volume + 9 Key brightness + 10 Key brightness – 11 Key Music 12 Key intercom 13 Microphone 14 Loudspeaker 15 Power connector Monitor view 2 www.PyleUSA.
CAMERA VIEW 1 Light sensor 2 Camera lens 3 Infrared LEDs 4 Power LED 5 Microphone 6 Loudspeaker 7 Paring key 8 Key power on/off 9 Temperature sensor 10 Power connector Before installing the camera, test the device to make sure that position is suitable. Check the correct signal reception. If necessary, move the camera to improve reception. Connect the camera power to the transformer supplied. The blue LED turns on to indicate that it is running. www.PyleUSA.
PACKAGE CONTENT Connect the monitor power. The display turns on for a few seconds to indicate battery charge level. We recommend that you completely recharge the battery before first use. Push the power key up to turn the monitor and camera on MAIN SCREEN 1 Signal level 2 Temperature measured in child’s room 3 Playhead of a melody in progress 4 Alarm activated 5 Level of battery charge 6 Activated intercom function 7 Date and time 4 www.PyleUSA.
MAIN MENU To access, press « menu ». This menu contains 6 icons: 1 Camera 2 Alarm 3 Setting 4 VOX setting 5 Languages 6 Information Press the key « up » and « and » to select the option. PARING WITH CAMERA The display and the camera are paired at the factory. You don’t need to repeat this procedure unless they both loose connection. In this case, do as follows. • Press the key “menu” to enter the main menu. • Select the icon “camera.” • Press “OK” to enter the menu. • Press “OK” again to start recording.
MUSIC PLAYING Press the music key to activate a lullaby on the camera, Press this key again to stop the melody. INTERCOM FUNCTION Press the PTT Key to activate the intercom function. The icon displayed indicates that the microphone is active. Keep this key pressed until you have finished speaking. Do not release too quickly not to interrupt the conversation.
ADVANCED PARAMETERS • Date and Time: Allows setting of date and time of your product. • To change the line, press the key “right” • To change time, press “Up/Down” • Press to switch to minutes “Left/Right” • To activate summer time, select the line with the key ”right” and press “Down • When settings are finished, press « Done ». • Temperature scale: Celsius or Fahrenheit degrees. • Anti-flickering: the flickering is due to artificial lighting. In Europe, use 50Hz.
LANGUAGES Choosing a menu language: English \ French \ Spanish \ Portuguesa \ Italian \ Deutsch SYSTEM INFORMATION The system information icon contains data of the software installed in the product. TECHNICAL FEATURES • Display LCD 2 inches • Resolution: 220X176@20fps • Frequency: 2.4 GHz Digital • Range: 260m in open field • Consumption max: 550mA@5VDC • Battery Li-Po 550mAh • Sensor: 0.
by
