PSPR170 Cordless Lithium Power Pruner Pruning Shear with 7.
Fig. 1a 1 2 3 4 Fig.1b 5 Fig.2a 2 www.SereneLifeHome.com 6 7 Fig.
1 Fig. 3 Fig. 4a 8 9 10 11 1 45° Fig.4b Fig.4c 1 Fig.5 1 2 3 4 5 6 7 www.SereneLifeHome.
1. Safety Regulations General Power Tool Safety Warnings WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refer to your electric (corded) power tool or battery-operated (cordless) power tool. Explanation of the warning signs on the equipment (see Fig.
f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. Personal Safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use personal protective equipment.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f.
6. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Cordless Garden Pruners Safety warnings • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Information about the battery 1. The battery pack supplied with your cordless tool is not charged. The battery pack has to be charged before you use the tool for the first time. 2. For optimum battery performance avoid low discharge cycles. Charge the battery pack frequently. 3. Store the battery pack in a cool place, ideally at 59°F (15°C) and charged to at least 40%. 4. Lithium-ion batteries are subject to a natural ageing process.
Information on chargers and the charging process 1. Please check the data marked on the rating plate of the battery charger. Be sure to connect the battery charger to a power supply with the voltage marked on the rating plate. Never connect it to a different mains voltage. 2. Protect the battery charger and its cable from damage and sharp edges. Have damaged cables repaired without delay by a qualified electrician. 3. Keep the battery charger, batteries and the cordless tool out of children’s reach. 4.
2.2 Items supplied • Open the packaging and take out the equipment with care. • Remove the packaging material and any packaging and/or transportation braces (if available). • Check to see if all items are supplied. • Inspect the equipment and accessories for transport damage. • If possible, please keep the packaging until the end of the guarantee period. Important! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts.
Battery charger Mains voltage ............ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 120-240 VAC ~ 50-60 Hz Output Rated voltage ............ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9V DC Rated current: ............ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• whether there is voltage at the socket outlet • whether there is good contact at the charging contacts If the battery pack still fails to charge, send • the Battery charger • and the battery pack to our customer service center. To ensure that the battery pack provides long service, you should take care to recharge it promptly. You must recharge the battery pack when you notice that the power of the cordless pruner drops. Never fully discharge the battery pack. This will cause it to develop a defect. 6.
Remove the blade 1 along 45° direction (Fig.4b). To insert the blade 1, Be careful not to allow any foreign matter to become attached to the blade gear and do not damage it. First Insert part of the tooth of the blade 1 into the case as shown(Fig.4c), then rotate the blade 1until the hole of the blade 1 is aligned to the hole of the aluminum gearbox. Incorrect location of the blade will damage the machine. Refit the blade screw then refit the washer 8 and the wave washer 9, at last tighten the blade nut 11.
8. Disposal and recycling The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. The unit and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Ask your dealer or your local council. For EU countries only Never place any electric power tools in your household refuse.
Features: • 7.2 Volt Lithium Battery • 3/4" Standard Cut Capacity • Safety Switch • Changeable Battery Pack • Solo Battery For Portability and Endurable Work • Easy Cutting • Ergonomic Handheld Design • Ideal for Bushes, Roses, Woody Stems and Branches What's in the Box: • Cordless Lithium Pruner • Battery Pack • Charger Technical Specs: • Power Supply: 7.2V • Battery Type: Lithium-ion Battery • Battery Capacity: 2000mAH • Standard Cut Capacity (Fresh Branch): 0.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
