Specifications

Receiver Tone Control
1. While on a call and i s active (illuminated), digital tone
control becomes active.
2. Press or key to select one of four tone settings
(T1, T2, T3, T4) for best voice clarity. (T1 is the lowest
Answering a call
1. Press key when phone rings.
(Press again to engage speakerphone if need).
2. Press key to end the call.
Making a Call
1. Enter phone number on keypand .
2. Press key to go on-line and dial.
(Press gain to engage speakerphone if need).
3. Press key to end the call.
Volume Control (receiver and speakerphone)
1. While on a call, press key on the handset (side ) to
change volume setting. A short audio beep is provided on
each key activation. A long beep indicates either maximum
or minimum volume setting has reached. You should stop
2. Press key to end the call.
(Amplify) Function
1. While on a call, press key to add an extra level of
amplification (37 dB for CL-65 and 22 dB for CL-30) to the
pressing in that direction.
receiver volume. This is indicated by an illuminated button.
2. Press key to end the call.
tone setting while T4 is the highest).
Automatic Function, Talking CID/Keypad, Language Switches
The function can be set to ON automatically each time
the phone is cted used. This automatic setting can be sele via a
slide switch and is recommended for a single user household.
Talking CID and Talking Keypad feature can also be set to ON /
1. Open battery comp a rtment
cover to expose three small
2. Set Switch 1 to ON if you
want to be ON every
3. Set Switch 2 to ON for t a lking CID and Talking keypad.
4. Slide Switch 3 for either E nglish or French voice for the
Programming One-Touch Memories
1. While off -line, enter phone number and confirm.
2. Press and h o ld (or M1 to M8) for 5 seconds to save.
V erify by a confirmation tone.
Pressing repeatedly means changing from T1 toward
T4. A long beep indicates the highest tone setting has
Pressing repeatedly means changing from T4 toward
T1. A long beep indicates the lowest tone setting has
3. If necessary , re-adjust receiver volume in order to further
4. Press key to end the call.
ON - OFF
ON - OFF
1 = AUTO- AMPLIFIER
2
= TALKING CID &
KE Y P A D
FRENCH
ENGLISH
3
ENGLISH
reached (T4). You should stop pressing.
reached (T1). Y ou should stop pressing.
enhance voice clarity.
OFF via a second slide switch.
slide switches as shown.
time.
talking features.
7 8