Use and Care Manual

4. Install plumbing fixtures

•Connect drain to sink. Connect trap to drain. Connect watersupply

connections to faucet according to manufacturer’sinstructions

• Run water into sink and check for leaks

3. Install sink

•Check the alignment of the sink to the opening in the countertop. Use a

bead of clear silicone (or preferred adhesive)aroundthe underside of the sink

• Carefully place the sink on the countertop, align, and press firmly

• Allow sealant to set for 30 – 60minutes

NOTE: Use acetone or rubbing alcohol to remove any excesssealant

immediately after application