User`s manual

34
English
1. On Handset 1, press key to
answer the
incoming call.
2. On Handset 1, press
PAGE
key and then press “2” on the
keypad to page Handset 2.
(This also places the caller on
HOLD.)
3. On Handset 2, press key to
answer the page.
4. On Handset 1, press key
to initiate conferencing. Both
Handset 1 and Handset 2 are
now connected to the outside
caller.
5. On either handset , press
key to end the call and return
to off-line.
75. NON-DISTURB FUNCTION (DO-
NOT-DISTURB)
This function turns off the
handset ringer and allows the
user to ignore all incoming calls
(except
intercom calls).
1. Press and hold key for ve
seconds to enter non-disturb
function and the screen
displays “NON-DISTURB”.
2. To turn-off “NON-DISTURB”,
press and hold key again
for ve seconds.
76. PAUSE FUNCTION
During pre-dialing or one-touch
memory programming, press the
key, it will insert a 2-second
pause into the dialing sequence.
77. BARRING (TOLL CALL
RESTRICTION)
This function allows the user to
prevent certain phone number
prex from dialing out. For
example: 1 900 xxx xxxx
numbers can be
restricted.
1. While off-line, press key
and screen displays “CALL
LOG”.
2. Press key to scroll to “HS
SETTING”. Press to
select.
3. Press key to scroll to
“BARRING”. Press to
select.
4. Handset screen displays “PIN
?”.
5. Enter PIN on keypad and then
press to conrm (default
PIN is “0000”). Press key
to turn it on if necessary.
6. Handset screen displays
“SELECT NUM”. Press
to conrm.
7. Handset screen displays
“NUMBER 1”. Press to
conrm.
8. Handset screen displays
“NUMBER ?”.
9. Enter the prex for toll
restricting (up to 4-digits is
allowed).
10. Press to conrm.
11. Press or key to enter
another prex (4 prexes are
allowed).
(Note: If “EXTERNAL” option is
selected, all outgoing calls will be
blocked. Incoming calls are still
allowed.)
78. HANDSET POWER ON / OFF
Powering down a handset ignores
all calls and conserves battery
power.
1. Press and hold the key for
ve seconds,
then the handset will turn off.
There will be no display and
no keypad back-light.
2. To turn on the handset, Press
and hold the key for ve
seconds, and the handset
powers up again. Please wait
10-25 seconds for a “di-du”
sound which conrms that
the handset has established
handshaking with the base.