User`s manual

30
English
call and while that number is
still showing on LCD screen.
2. Press the key to dial it out.
Note: If necessary. press
key to add “1” or to delete area
code before dialing.
61. SAVE AN INCOMING CALL TO
PHONE-BOOK
1. After reviewing the incoming
call and while that number is
still showing on LCD screen.
2. Press key for conrmation,
then the screen displays
“COPY TO PB ?”
3. Press “DOWN” key once and
screen displays “ADD TO PB
?”
4. Press key and it displays
the name?
5. Enter the name using the
keypad.
6. When nish, press key
and it displays phone number
again for editing.
7. Press , or key to
revise phone number.
8. Press key to save and
back to incoming call review
mode.
9. Press key to exit to off-line
mode.
62. DELETE AN INCOMING CALL
RECORD FROM CALL LOG
1. After reviewing the incoming
call and while that number is
still showing on LCD screen:
2. Press key and the screen
displays “COPY TO PB ?”.
3. Press or key to scroll to
“DELETE”.
4. Press key and it displays
“CONFIRM ?”, then press
again for conrmation.
5. Press key to exit to off-line
mode.
63. DELETE ALL INCOMING CALL
RECORDS FROM CALL LOG
1. While reviewing an incoming
number:
2. Press key and the screen
displays “COPY TO PB ?”.
3. Press or key to scroll to
“DELETE ALL”.
4. Press key and it displays
“CONFIRM ?”, then press
again for conrmation.
5. Press key to exit to off-line
mode.
64. CALL LOG REVIEW (DIALED
CALLS)
1. While off-line, press key
and screen displays “CALL
LOG”.
2. Press key and screen
displays “RECEIVED”.
3. Press key to scroll to
“DIALED”.
4. Press key and it displays
the most recent dialed call.
5. Press or key to review
the most recent ten (10) dialed
calls.
6. Press key to redial the
number shown on the display.
(Note: Press the key while
in standby is a short cut to the
“Dialed Calls” or the outgoing
called List.)
65. SAVE FROM CALL LIST TO
PHONE-BOOK
1. Review and select a phone
number from the Called List
as above.
2. Press key and the screen
displays “ADD TO PB ?”.
3. Press key and the screen
displays NAME ?
4. Use the keypad to input the
name.
5. Press key and the screen
displays the number to save,
press , , or key to
revise number if necessary.
6. Press key and it displays
“MELODY 1”.
7. Press or key to select
ringer tone as VIP ringer.
8. Press key to save and then
return to the review mode..
9. Press key to exit to off-line
mode.
66. DELETE A CALL FROM THE
CALLED LIST
1. Review and select a phone
number from the Called List
as above.
2. Press key for conrmation
and the screen displays “ADD
TO PB ?”.
3. Press key to scroll to either
“DELETE” or “DELETE ALL”
4. Press key to conrm.
Screen displays “CONFIRM ?”
again.
5. Press key to conrm.
6. Press key to exit to off-line
mode
67. INTERCOM BETWEEN HANDSETS
1. This function is available when
two or more handsets are
registered to the same base.
2. Base must be powered up in
order for the intercom function
to work.
68. INTERCOM FROM HANDSET 1 TO
HANDSET 2
1. While in the standby mode,
press
PAGE
key on handset 1,
the LCD will display “HS ?”.
2. Input “2” and the display
shows “CALLING HS 2”.
Handset 2 will ring.
3. The user on Handset 2
activates key of handset 2
to enter talking mode.
4. Press key of any of the two
handsets to end the intercom
mode and returns to the
standby mode.
69. HANDSET RING TONE & VOLUME
SETTING
1. While off-line, press key
and it displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTINGS”.
3. Press key and it displays