User`s manual

28
English
mode.
55. TIME FORMAT SETTING
Either 12 or 24 hour format is
supported.
1. While off-line, press key
and it displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTINGS”
3. Press key to conrm.
4. Press or key to scroll to
“DATE & TIME” and press
to conrm.
5. Press key and then the
screen displays “TIME FORM”
6. Press key and the screen
displays “12H”
7. Press or key to select
either “12H” or “24H” format.
8. Press key to conrm. A
sound of “di du” indicates
success. Screen displays
“TIME FORM” again.
9. Press key to exit to off-line
mode.
56. DATE & TIME SETTING
If you subscribe to Caller ID (CID)
service from your local phone
company, the date and time
information within the CID data
will update this automatically.
Otherwise, user must set time in
“24” hour format mode and then
change to the 12 hour format
later for the proper display of AM
or PM. (Note: “PM” indication
can not be set in the 12 hour
mode.)
1. While off-line, press key
and it displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTINGS”
3. Press key for conrmation
4. Press or key to scroll to
“TIME FORM” and press
for conrmation.
5. Press key to see “24 H”
and then press to
select.
6. Press key to see “TIME
SET”
7. Use the number keys to input
new time in 24 hour format
(HH / MM),
8. Press key for conrmation.
A sound of “di du” indicating
successfully setting. The
screen displays “SET TIME”
again.
9. Press or key to scroll to
“SET DATE” and press for
conrmation.
10. Use the number keys to input
new date in (MM / DD / YYYY)
format,
11. Press key for conrmation.
A sound of “di du” indicating
successfully setting. The
screen displays “SET DATE”
again.
12. Press key to quit and go
back to standby mode
57. RESTORE HANDSET DEFAULT
SETTINGS
Note: This setting restores
handset factory default settings.
All custom settings will be lost.
All phone book entries are not
affected.
1. While off-line, press key
and screen displays “CALL
LOG”.
2. Press or to scroll to
“HS SETTINGS”.
3. Press key to conrm.
4. Press or key to scroll to
“HS DEFAULT”.
5. Press key for conrmation
and it displays “PIN ?”.
6. Input PIN number xxxx
(factory default PIN = “0000”).
7. Press key for conrmation.
A sound of “di du” indicates
success.
8. Press key to quit and
return to standby mode.
Please allow 10 seconds for
the handset to re-establish
handshaking with base.
58. RESTORE BASE DEFAULT
SETTING
Note: This setting restores base
factory default settings. All
custom settings will be lost.
All messages and time will be
affected.
1. While off-line, press key
and screen displays “CALL
LOG”.
2. Pressorto scroll to “BS
SETTINGS”.
3. Press key to conrm.
4. Press or key to scroll to
“BS DEFAULT”.
5. Press key for conrmation
and it displays “PIN ?”. Input
PIN number xxxx (factory
default PIN = “0000”).
6. Press key for conrmation;
a sound of “di du” indicates
success. However, a sound
of “di” indicates the wrong
PIN input. Re-enter again.
7. Press key to quit and
return to standby mode.
Please allow 10 seconds for
the handset to re-establish
handshaking with the base.
59. CALL LOG REVIEW (RECEIVED
CALLS)
1. Press key while off-line
and it displays “CALL LOG”.
2. Press key and it displays
“RECEIVED”.
3. Press key and it displays
the latest group of incoming
calls.
4. Press or key to scroll to
the number for call back or to
save.
(Note: Press the key while in
off-line mode is a short-cut to the
incoming call List.)
60. CALL BACK TO AN INCOMING
CALLER
1. After reviewing the incoming