User`s manual

26
English
handsets you want again.
49. AREA CODE SETTING
1. Press key while off-line
and it displays “CALL LOG”.
Press or key to scroll
to “HS SETTING”.
2. Press key and it displays
“AUDIO SETUP”.
3. Press or key to scroll to
“AREA CODE”.
4. Press key to select area
code for editing.
5. Use keypad to enter new area
code.
(If necessary, press key to
erase old area code.)
6. Press key to conrm entry.
7. Press key to exit to off-line.
50. DIALING MODE SETTING (TONE
OR PULSE)
(CL-60A is factory preset for tone
dialing)
1. While off-line, press key
and it displays “CALL LOG”.
2. Press or key to scroll to
“BS SETTINGS” function
3. Press key, then it displays
“DELETE HS”
4. Press or key to scroll to
“DIAL MODE”
5. Press key and it displays
“TONE” or “PULSE”
6. Press or key to select
“TONE” or “PULSE” mode.
7. Press key to conrm. A
sound of “Du” indicating
successful setting.
8. press key to quit setting
and to exit to off-line mode
51. AUTO-ANSWER WHEN LIFTING
HANDSET
If this function is ON, lifting
the handset from the base
automatically answers the
incoming call. There is no need
to press the “TALK” key. Factory
default is “OFF”.
1. While off-line, press key
and it displays “CALL LOG”.
2. Press or key to scroll to
“HS
SETTINGS” function.
3. Press key and it displays
“AUDIO SETUP”.
4. Press or key to scroll to
“AUTO ANSWER”.
5. Press key to conrm, and
it displays “ON” or “OFF”..
6. Press or key to select
OFF or ON.
7. Press key to conrm. A
sound of “di du” indicates
success.
8. Press to exit to off-line
mode.
52. HANDSET NAME SETTING
This function allows you to
display a favorite NAME on the
handset screen. A name like
“Study”, “Kevin” or “Living Rm”
suggests where it belongs.
1. While off-line, press key
and it displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTINGS” function
3. Press key and it displays
“AUDIO SETTING”.
4. Press or to scroll to
“HS NAME”.
5. Press key to select and a
cursor is ashing.
6. Use keypad to input name.
7. Press key to conrm. A
sound of “di du” indicates
success.
8. Press key to exit to off-line
mode.
53. LANGUAGE SELECTION
Three languages are supported
on the LCD display: English,
French, and Spanish. The CL-
60A only supports English and
French for Talking CID & Talking
Keypad.
1. While off-line, press key
and it displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTING” function
3. Press key to conrm and it
displays “AUDIO SETUP”.
4. Press or key to scroll to
“LANGUAGE” function
5. Press and it displays
“ENGLISH”.
6. Press or to select
“FRENCH” or “SPANISH”.
7. Press key to conrm. A
sound of “di du” indicates
success.
8. Press key to exit to off-line
mode
54. MODIFY PIN (CHANGING THE
PASSWORD)
Certain important function
changes require the user to enter
a PIN number so that accidental
change can not happen. Factory
default PIN is “0000”.
1. While off-line, press key
and it displays “CALL LOG”.
2. Press or key to scroll to
“BS SETTING” function
3. Press to conrm.
4. Press or key to scroll to
“MODIFY PIN” function
5. Press key to conrm and
the screen displays “PIN ?”
6. Input the old or default PIN
number “xxxx” and it display
NEW PIN? (Note: factory
default PIN = “0000”)
7. Input your favorite new PIN
number with 4 digits. In case
of a wrong input, press key
to delete and then re-enter.
8. Press key for conrmation,
the screen displays
“REPEAT”,
9. Input new PIN again. (Record
your new PIN for future use,
as it cannot be recovered)
10. Press key to conrm. A
sound of “di du” indicates
success.
11. Press key to exit to off-line