User's Manual
:LUHOHVV6HWWLQJV
WPS Process
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 75
REVIEW DRAFT Version 2—CISCO CONFIDENTIAL
67(3 Obtain the PIN from the client device. The PIN may be printed on the hardware
itself, or may be obtained from the device’s software interface.
67(3 Click :LUHOHVV > :363URFHVVin the navigation window.
67(3 Enter the client’s PIN in the 3,1(QUROOPHQW text box and click 6WDUW.
67(3 Within two minutes, enter the AP’s pin on the client station’s software interface.
The AP’s pin is configured on the :366HWXS page.
When you enter the PIN on the client device, the The WPS Operational Status
changes to Adding Enrollee. When the enrollment process is complete, the WPS
Operational Status changes to Ready and the Transaction Status changes to
Success.
127( This enrollment sequence may also work in reverse; that is, you may be able to
initiate the process on the client station by entering the AP’s pin, and then entering
the client’s PIN on the AP.
When the client is enrolled, either the AP’s internal registrar or the external
registrar on the network proceeds to configure the client with the SSID, encryption
mode, and public shared key of a WPS-enabled BSS.
(QUROOLQJD&OLHQW8VLQJWKH3XVK%XWWRQ0HWKRG
To enroll a client station using the push method:
67(3 Click 6WDUW next to 3%&(QUROOPHQW.
67(3 Push the hardware button on the client station.
127( You can alternatively initiate this process on the client station, and then click the
PBC Enrollment Start button on the AP.
When you push the button on the client station, the The WPS Operational Status
changes to Adding Enrollee. When the enrollment process is complete, the WPS
Operational Status changes to Ready and the Transaction Status changes to
Success.
When the client is enrolled, either the AP’s internal registrar or the external
registrar on the network proceeds to configure the client with the SSID, encryption
mode, and public shared key of a WPS-enabled BSS.