User's Manual

6103Y
SNMP Views
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 80

REVIEW DRAFT Version 2—CISCO CONFIDENTIAL
An example of a DNS hostname is: snmptraps.foo.com. Since SNMP traps
are sent randomly from the SNMP agent, it makes sense to specify where
exactly the traps should be sent. You can add up to a maximum of three DNS
hostnames. Ensure you select the E
E
nabled check box and select the
appropriate Host Type.
67(3  Click 6DYH. The changes are saved to the Running Configuration and to the Startup
Configuration.
127( Changing some settings might cause the AP to stop and restart system processes.
If this happens, wireless clients will temporarily lose connectivity. We recommend
that you change AP settings when WLAN traffic is low.
61039LHZV
An SNMP MIB view is a family of view subtrees in the MIB hierarchy. A view
subtree is identified by the pairing of an object identifier (OID) subtree value with a
bit string mask value. Each MIB view is defined by two sets of view subtrees,
included in or excluded from the MIB view. You can create MIB views to control the
OID range that SNMPv3 users can access.
The AP supports a maximum of 16 views.
The following notes summarize some critical guidelines regarding SNMPv3 view
configuration. Please read all the notes before proceeding.
127( A MIB view called all is created by default in the system. This view contains all
management objects supported by the system.
127( By default, view-all and view-none SNMPv3 views are created on the AP. These
views cannot be deleted, but the OID, Mask, and Type fields can be modified.
To configure an SNMP view:
67(3  Click 6103Y > 9LHZV in the navigation window.
67(3  Configure the parameters:
• 9LHZ1DPH—A name that identifies the MIB view. View names can contain
up to 32 alphanumeric characters.
• 7\SH—Whether to include or exclude the view subtree or family of subtrees
from the MIB view.