Wireless P/T Network Camera User’s Guide
Table of Contents CHAPTER 1 INTRODUCTION.............................................................................................. 1 Overview ............................................................................................................................ 1 Physical Details - Network Camera ................................................................................. 4 Package Contents ........................................................................................................
CHAPTER 6 TROUBLESHOOTING .................................................................................. 72 Overview .......................................................................................................................... 72 Problems........................................................................................................................... 72 APPENDIX A SPECIFICATIONS........................................................................................
Chapter 1 Introduction 1 This Chapter provides details of the Network Camera's features, components and capabilities. Overview The Network Camera has an Integrated Microcomputer and a high quality CMOS digitalImage-Sensor, enabling it to display high quality live streaming video over your wired LAN, the Internet, and for the Network Camera, an 802.11N Wireless LAN. Using enhanced H.264 technologies, the Network Camera is able to stream high quality video and audio directly to your PC.
Dual Video Support. The Network Camera can support H.264, MEPG4 and MJEPG video for different image compression. Stream Live Video to Multiple Users. The video encoder and HTTP server built into the camera generate a ready-to-view video stream. Just connect to the camera using your Web browser or the provided Windows utility to view live video. Suitable for Home, Business or Public Facilities.
NTP (Network-Time-Protocol) Support. NTP allows the Network Camera to calibrate its internal clock from an Internet Time-Server. This ensures that the time stamp on Video from the Network Camera will be correct. Security Features User Authentication. If desired, access to live video can be restricted to known users. Users will have to enter their username and password before being able to view the video stream. Up to 10 users can view the video simultaneously. Password-Protected Configuration.
Physical Details - Network Camera Front - Network Camera Figure 2: Front Panel White Light LEDs These White Light LEDs are designed for the supply of backlighting while under the low-light environments. The LEDs can be turned on by Event Trigger when the light is insufficient. They can also be manually turned on/off on the View Video Screen. Day/Night Sensor This is hardware sensor to detect LUX.
Rear - Network Camera Figure 3: Rear Panel Antenna Attach the supplied antenna here. The antenna is adjustable; best results are usually obtained with the antenna positioned vertically. Power Input Connect the supplied 12V power adapter here. Do not use other power adapters; doing so may damage the camera. Reset Button This button is recessed; you need a pin or paper clip can be used to depress it. It can be activated at any time the camera is in the "ready" mode.
Digital Input/Output The GPIO terminal block includes 1 input port and 1 output port. Speaker Out If required, an external speaker can be plugged in here. Package Contents The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately. 1. 2. 3. 4.
Chapter 2 Basic Setup 2 This Chapter provides details of installing and configuring the Network Camera. System Requirements To use the wired LAN interface, a standard 10/100BaseT hub or switch and network cable is required. To use the Wireless interface on the wireless model, other Wireless devices must be compliant with the IEEE802.11b, IEEE802.11g or IEEE802.11n specifications. All Wireless stations must use compatible settings.
Installation - Network Camera 1. Assemble the Camera Screw the supplied antenna to the mounting point on the rear. Attach the Camera Mount to the camera. 2. Connect the LAN Cable Connect the Network Camera to a 10/100BaseT hub or switch, using a standard LAN cable. For the Wireless Model, this will disable the Wireless Interface. The Wireless and LAN interfaces cannot be used simultaneously. Using the LAN interface is recommended for initial configuration.
Setup using the Windows Wizard Initial setup should be performed using the supplied Windows-based setup Wizard. This program can locate the Network Camera even if its IP address is invalid for your network. You can then configure the Network Camera with appropriate TCP/IP settings for your LAN. Subsequent administration can be performed with your Web browser, as explained in Chapter 5 - Web-based Management. Setup Procedure 1. Insert the supplied CD-ROM into your drive.
Select the desired Camera from the list on the left. The current settings for the selected Camera will be displayed in the table on the right. Click Next to continue. 3. You will be prompted to enter the Administrator Name and Administrator Password, as shown below. If using the default values, enter administrator for the name, and leave the password blank. Otherwise, enter the Administrator Name and Administrator Password set on the Maintenance screen. Figure 6: Password Dialog 4.
Figure 8: IP Address Settings Fixed IP Address is recommended, and can always be used. Dynamic IP Address can only be used if your LAN has a DCHP Server. PPPoE (PPP over Ethernet) is the most common login method, widely used with DSL modems. Click Next to continue. 6. If you chose Fixed IP Address, the following TCP/IP Settings screen will be displayed. Figure 9: TCP/IP Settings Enter an unused IP Address from within the address range used on your LAN.
Click Next to continue. 7. If you chose PPPoE, the following PPPoE Settings screen will be displayed. Figure 10: PPPoE Settings Screen Enter the User Name provided by your ISP. Enter the Password for the user name above. Click Next. 8. The next screen, shown below, displays all details of the Network Camera. Click Next if the settings are correct. Click Back to modify any incorrect values.
9. Click OK to confirm that you want to save the new settings. If you want to cancel your changes, click Cancel. Figure 12: Confirm Screen 10. After clicking OK, you will see the screen below. Figure 13: Final Screen 11. Click Exit to end the Wizard. Setup is now complete.
Chapter 3 Viewing Live Video 3 This Chapter provides basic information about viewing live video. Overview After finishing setup via the Windows-based Wizard, all LAN users can view live video using Internet Explorer on Windows. This Chapter has details of viewing live video using Internet Explorer.
Figure 14: Home Screen 5. Click View Video. 6. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the Network Camera administrator. 7. The first time you connect to the camera, you will be prompted to install an ActiveX component (OCX or CAB file), as in the example below. You must install this ActiveX component (OCX or CAB file) in order to view the Video stream in Internet Explorer.
Connecting to a Camera via the Internet You can NOT connect to a camera via the Internet unless the camera Administrator has configured both the camera and the Internet Gateway/Router used by the camera. See Making Video available from the Internet in Chapter 4 - Advanced Viewing Setup for details of the required configuration. Also, you need a broadband Internet connection to view video effectively. Dial-up connections are NOT supported.
4. When you connect, the following screen will be displayed. Figure 16: Home Screen 5. Click View Video. 6. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the Network Camera administrator. 7. The first time you connect to the camera, you will be prompted to install an ActiveX component (OCX or CAB file), as in the example below.
Viewing Live Video After installing the ActiveX component, you will be able to view the live video stream in its own window, as shown below. Figure 18: View Video Screen There are a number of options available on this screen, accessed by select list, button or icon. See the table below for details. Note: The options can only be configured while using IE browser. Other browsers can just view the video rather than configuration.
Motion Detection Screen General Options These options are always available, regardless of the type of camera you are connected to. Streaming. Use this drop-down list to select the desired streaming. Full Size. When using high-resolution mode (1280*720), click this button to see the full size of the image. Select the desired option from the drop-down list. Use this icon to start/stop viewing. Use this icon to make the image back to original size. Zoom Out. A digital zoom out feature is available.
Direct P/T. Use this to move the camera to the Pan/Tilt position directly. Preset Points. Select the desired Preset points. Move Control. Use this to move the camera to the desired position. There may a short delay after clicking the desired icon. You should wait a couple of seconds rather than click again. Or you can drag the vertical or horizontal slider bar to have quicker movement of the Network Camera to the desired position.
Chapter 4 Advanced Viewing Setup 4 This Chapter provides information about the optional settings and features for viewing video via the Network Camera. This Chapter is for the Camera Administrator only.
Default Streaming Channel Select the default channel for streaming from the drop-down list. Streaming 1 Settings Video Format Select the desired format from the list. Resolution Select the desired video resolution format. Video Quality Control Profile Constant Bit Rate: Select the desired bit rate. The default is set to 1.0 Mbps. Fixed Quality: Select the desired option. The default fix quality is set to Normal. This is only for H.264 format only.
Max. Frame Rate Select the desired Maximum frame rate for the video stream. The default value is 30. User Defined URI You may enter the URI up to 32 characters long for accessing the live video from camera through cell phone connection.
Controlling User Access to the Video Stream By default, anyone can connect to the Network Camera and view live Video at any time. If desired, you can limit access to scheduled times, and also restrict access to known users. To Control User Access to Live Video: 1. Connect to the Web-based interface of the Network Camera. (See Chapter 5 - Web-based Management for details.) 2. Select Administration, then Video Access. 3. Set the desired options for Access.
Making Video available from the Internet If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and Broadband modem, you can make the Network Camera available via the Internet. You will need to configure your Router or Gateway to allow connections from the Internet to the camera. Router/Gateway Setup Your Router or Gateway must be configured to pass incoming TCP (HTTP) connections (from Internet Viewers) to the Network Camera.
Network Camera Setup The Network Camera configuration does NOT have be changed, unless: You wish to change the port number from the default value (1024). You wish to use the DDNS (Dynamic DNS) feature of the Network Camera. HTTP Port Configuration Normally, HTTP (Web) connections use port 80. Since the Network Camera uses HTTP, but port 80 is likely to be used by a Web Server, you can use a different port for the Network Camera. This port is called the Secondary Port.
Figure 24: DDNS Screen 4. Operation is then automatic: The Network Camera will automatically contact the DDNS server whenever it detects that the Internet IP address has changed, and inform the DDNS server of the new IP address. Internet users can then connect to the camera using the Domain Name allocated by the DDNS service provider. Example: http://normanyu123456789.dyndns.org:6016 normanyu123456789.dyndns.org is domain host name. 6016 is the port number.
Viewing Live Video via the Internet Clients (viewers) will also need a broadband connection; dial-up connections are NOT recommended. Viewing Live Video Using your Web Browser If using your Web browser, you need to know the Internet IP address (or the Domain name) of the camera's Router/Gateway, and the correct port number. Enter the Internet address of the Router/Gateway, and its port number, in the Address (or Location) field of your Browser. Example - IP address: HTTP://203.70.212.
Motion Detection Alerts The Motion Detection feature can generate an Alert when motion is detected. The Network Camera will compare consecutive frames to detect changes caused by the movement of large objects. But the motion detector can also be triggered by: Sudden changes in the level of available light Movement of the camera itself. Try to avoid these situations. The motion detection feature works best in locations where there is good steady illumination, and the camera is mounted securely.
Select or enter the desired options for Video Attachment, Show "From" as and Subject fields. Enter details of the SMTP Server used to send the E-mail. If the Motion Detection feature is enabled, but E-Mail is not enabled, then the only action when motion is detected is to log this event in the system log.
Chapter 5 Web-based Management 5 This Chapter provides Setup details of the Network Camera’s Web-based Interface. This Chapter is for the Camera Administrator only. Introduction The Network Camera can be configured using your Web Browser. The Network Camera must have an IP address which is compatible with your PC. The recommended method to ensure this is to use the supplied Windows-based Wizard, as described in Chapter 2 - Basic Setup.
Welcome Screen When you connect, the following screen will be displayed. Figure 26: Welcome Screen The menu options available from this screen are: View Video - View live Video using your Web Browser. See Chapter 3 - Viewing Live Video for details. Administration - Access the Administration menu.
Administration Menu Clicking on Administration on the menu provides access to all the settings for the Network Camera.
System Screen After clicking Administration on the main menu, or selecting System on the Administration menu, you will see a screen like the example below. Figure 27: System Screen Data - System Screen System Settings Device ID This displays the ID for the Network Camera. Camera Name Enter the desired name for the Network Camera. Description This field is used for entering a description, such as the location of the Network Camera.
Current Date & Time Time Zone This displays the current date and time on the camera. If it's not correct, click the Change button to modify the date/time settings. This button will open a sub-screen where you have 2 options: Set the camera's date and time to match your PC. Enter the correct date and time. Choose the Time Zone for your location from the drop-down list. If your location is currently using Daylight Saving, enable the Adjust for daylight saving checkbox.
Network Screen This screen is displayed when the Network menu option is clicked.
Data - Network Screen Network Internet Connection Type There are 3 connection types: Obtain Address Automatically (DHCP): If selected, the Network Camera will obtain its IP address and related information from a DHCP Server. Only select this option if your LAN has a DHCP Server. Static IP Address: If selected, you must assign the following data to the Network Camera. IP address - Enter an unused IP address from the address range used on your LAN.
HTTP/HTTPS This sets the port number for HTTP/HTTPS connections to the Camera, whether for administration or viewing video. The HTTP (HyperText Transfer Protocol) is used for the standard of transferring files (text, graphic images and other multimedia files) on the World Wide Web. The default HTTP port is 1024. HTTPS (Hypertext Transfer Protocol Secure) can provide more secure communication with the SSL/TLS protocol, which support data encryption to HTTP clients and servers.
Enable Traversal If enabled, HTTP connections (from your Web Browser or the Viewer and Recorder utility) can use secondary port instead of port 80 (the standard HTTP port) to access the camera. Bonjour Enable Bonjour Service If enabled, the Network Camera can be accessed through a "Bonjour" enabled browser, such as Microsoft Internet Explorer (with a Bonjour plug-in) or Safari browser. You can also find other Bonjour-enabled devices on your network.
Wireless Screen This screen is displayed when the Wireless menu option is clicked. Figure 29: Wireless Screen Data - Wireless Screen Wireless Network Site Survey Click the "Site Survey" button and select from a list of available APs. WSC PIN Code It displays the WSC PIN code number for the camera. Network Type This determines the type of wireless communication used by the Network Camera. If you have an Access Point, select Infrastructure. Otherwise, select Ad-hoc.
Channel No. In Infrastructure mode, this setting is ignored. The Network Camera will use the Channel set on the Access Point. For Ad-hoc mode, select the Channel you wish to use on your Network Camera. Other Wireless stations should use the same setting. If you experience interference (shown by lost connections and/or slow data transfers) you may need to experiment with different channels to see which one is the best.
DDNS Screen Many Internet connections use a "Dynamic IP address", where the Internet IP address is allocated whenever the Internet connection is established. This means that other Internet users don't know the IP address, so can't establish a connection. DDNS is designed to solve this problem, as follows: You must register for the DDNS service with a DDNS service provider. The DDNS Service provider will allocate a Domain Name to you upon request.
Web Site Button Click this button to open a new window and connect to the Web site for the selected DDNS service provider. Domain (Host) Name Enter the Domain Name (Host Name) allocated to you by the DDNS Server provider. Account/E-Mail Enter the login name for the DDNS account. Password/Key Enter the password for the DDNS account. Check WAN IP Address Set the schedule for checking if the Internet IP address has changed. If the IP address has changed, the DDNS Server will be notified.
IP Filter The IP Filter feature allows administrator to control network camera access by filtering IP addresses. This screen is displayed when the IP Filter menu option is clicked. Figure 31: IP Filter Screen Data - IP Filter Screen IP Filter IP Filter Select the desired method to perform the IP address (or addresses) filtering function. Single/Range Select to perform either single IP address or a range of IP addresses that you desired.
I/O Port The Network Camera supports 1 input port and 1 output port. This screen is displayed when the I/O Port menu option is clicked. Figure 32: I/O Port Screen Data - I/O Port Screen Input Ports Current State It indicates the current state of the input port. Once the configured state is happened, it will trigger the event actions. Triggered When… Select the desired State: High Low Rising Falling Output Ports Current State It indicates the current state of the output port.
Streamings This screen is displayed when the Streamings menu option is clicked. If you want to view streaming via the cell phone: 1. Cell phone should be supported by 3GPP protocol. 2. Enter 554 for RTSP port number in the Network screen. 3. Both MPEG-4 and H.264 format support cell phone option. 4. Enter the following address in the URI: RTSP:// Router IP address / User Defined URI 5. Select 15 fps for Max Frame Rate.
Data - Streamings Screen Default Streaming Channel Select the default channel for streaming from the drop-down list. Streaming 1 Settings Video Format Select the desired format from the list. Resolution Select the desired video resolution format. Video Quality Control Profile Constant Bit Rate: Select the desired bit rate. The default is set to 4.0 Mbps. Fixed Quality: Select the desired option. The default fix quality is set to Normal. This is only for H.264 format only.
User Defined URI You may enter the URI up to 32 characters long for accessing the live video from camera through cell phone connection.
Video & Audio Screen This screen is displayed when the Video & Audio menu option is clicked. Figure 34: Video & Audio Screen Data - Video & Audio Screen Basic Video Adjustment Power Line Frequency Select the power line frequency (50Hz or 60Hz) used in your region, to improve the picture quality under florescent lighting. White Balance Select the desired option to match the current environment and lighting. Brightness If necessary, you can adjust the brightness to obtain a better image.
Options Enable Microphone Enable audio by checking this checkbox. Using Audio will increase the bandwidth requirements slightly. Audio Type Select the desired audio type. Enable Speaker Enable speaker sound by checking this checkbox. Volume Choose the desired volume for the speaker. Flip This setting will have the image swapped top-to-bottom. Mirror This setting will have the image swapped left-to-right. Enable Time Stamp If enabled, the current time will be displayed on the Video image.
Video Access Screen This screen is displayed when the Video Access option on the Video & Audio menu is clicked. Figure 35: Video Access Screen Data - Video Access Screen User Access Enable Security Checking If disabled (default) - No login required. Users do not have to provide a username and password when they connect to the camera for viewing video. If enabled - Require login. Users will be prompted for a username and password when they connect to the camera for viewing video.
Delete Use the Delete button to delete the selected item in the list. Add New Schedule Day Choose the desired option for the period. Start Time Enter the start time using a 24 hr clock. End Time Enter the end time using a 24 hr clock. Add Click this button to add a new period. Clear Use this button to clear the input fields.
User Database Screen This screen is displayed when the User Database option is clicked. Figure 36: User Database Screen Data - User Database Screen Existing Users User List This displays all users you have entered into the User database. If you have not entered any users, this list will be empty. The maximum number of users is 20. Edit, Delete, Delete All Use these buttons to manage the user database. User Properties User Name Enter the name for the user here.
Clear Button Use this button to clear the input fields, ready to add a new user.
Pan/Tilt Screen This screen is displayed when the Pan/Tilt option on the Video & Audio menu is clicked. Figure 37: Pan/Tilt Screen Data - Pan/Tilt Screen Pan/Tilt Enable Pan/Tilt Control Enable the checkbox in order to use the Pan/Tilt function. Pan/Tilt Speed Select the desired motor speed for the Pan/Tilt control. Degrees to move per step… Enter the desired values in the Pan and Tilt fields to set the Pan/Tilt degrees. Patrol Select either One time or Always for the patrol function.
Set Patrol Sequence Set Patrol Sequence This feature determines how the camera will move when it is set to either "Once" or "Always" rotate. You can set a number of Preset Positions; the camera will go to the first position, then move through the list of present positions until it is finished. The camera will stop at the last position in the list. To create the Preset Sequence, select the desired Preset Position in the left column, and click the "Add >>" button.
Data - Preset Point Position Calibration Click this button to reset the calibration of Pan/Tilt area. Set Calibration Home Set the calibration to the default location. Preset List Select the desired Preset. The screen will update with the current data for the selected Preset Position. Preset Name Enter a suitable name for the Preset Position. If no name is entered, the preset will have a number only.
Motion Detection Screen This screen is displayed when the Motion Detection option on the Event menu is clicked. . Figure 39: Motion Detection Screen Data - Motion Detection Screen Motion Detection Set Detection Areas You can set the full screen or selected areas of the video image to be examined. Note: Motion detection can be triggered by rapid changes in lighting condition, as well as by moving objects. For this reason, it should only be used indoors.
Audio Detection Screen This screen is displayed when the Audio Detection option on the Event menu is clicked. . Figure 40: Audio Detection Screen Data - Audio Detection Screen Audio Detection Current Volume It displays the current volume of the environment. Click Refresh to update the status. Triggered Volume Drag the bar to set the volume for triggering. Triggered When Choose the desired situation for triggering the audio detection.
E-Mail Screen This screen is displayed when the E-Mail option on the Event menu is clicked. . Figure 41: E-Mail Screen Data - E-Mail Screen Primary/Secondary SMTP Server SMTP Server Address Enter the address of the SMTP (Simple Mail Transport Protocol) Server to be used to send E-Mail. Port Enter the Port of the SMTP Server to be connected. Authentication Select the desired Authentication type for the SMTP Server. SMTP Login name Enter your login name for the SMTP Server.
E-Mail Setup E-mail Address Enter at least one (1) E-Mail address; the 2nd and 3rd addresses are optional. The E-Mail alert will be sent to the E-Mail address or addresses specified here. With Attachment Enable the checkbox if you want to attaché files to the E-mail. Subject Enter the desired text to be shown as the "Subject" for the E-Mail when it is received. Subject can not exceed 48 alphanumeric characters.
FTP Screen This screen is displayed when the FTP option on the Event menu is clicked. Figure 42: FTP Screen Data - FTP Screen Primary/Secondary FTP FTP Server Enter the address of the FTP Server. Port Enter the Port of the FTP Server to be connected. Login name Enter your login name for the FTP Server. Password Enter your password for the FTP Server. Enable Passive Mode Check the box to enable the Passive mode feature of the FTP. File Path Name Enter the file path/name of the FTP.
HTTP Screen This screen is displayed when the HTTP option on the Event menu is clicked. Figure 43: HTTP Screen Data - HTTP Screen HTTP Notification URL Enter the URL of your HTTP notification server. User Name Enter the user name of the HTTP server. Password Enter the password of the HTTP server. Proxy Server Name Specify the proxy server name in the provided field if the camera needs to pass through a Proxy Server to do the HTTP notification.
SMB Client Screen This screen is displayed when the SMB Client option on the Event menu is clicked. Figure 44: SMB Client Screen Data - SMB Client Screen SMB Client SMB Client Enable this checkbox to use the SMB Protocol, which is a client server, request-response protocol used for read, create, and update files on the remote server. File Path Enter the file path of your SMB server. User Name Enter the user name for the SMB client account. Password Enter the password for the SMB client account.
Trigger & Recording Screen This screen is displayed when the Trigger & Recording option on the Event menu is clicked. Figure 45: Event Trigger Screen Data - Trigger & Recording Screen Settings Enable Enable this to manage the trigger settings. Schedule List The schedule shows all of the event types currently configured in the Network Camera, along with various information about their configuration, as listed below: Add, Edit, Delete Buttons Name - The descriptive event name set by the user.
Schedule Trigger by Actions Choose the desired option for the period. Always Schedule Never (Disabled) Motion Detection - Movement in a motion detection window can be used to trigger events. PIR - If the PIR sensor detects a human body, it will be used to trigger events. Input - This describes the states that the input must be in for an event to be triggered.
Maintenance Screen . Figure 46: Maintenance Screen Data - Maintenance Screen Administrator Login Administrator ID Enter the name for the Administrator here. Administrator Password The password for the Administrator. Verify Password Re-enter the password for the Administrator, to ensure it is correct. Spaces, punctuation, and special characters must NOT be used in the name.
Backup & Restore Backup Configuration File Click Backup button to save the current configuration information to a text file. It is suggested to backup the configuration file, in order to restore the camera easily. Restore Configuration File Click Restore button to reinitialize the camera to load the new updated software. Do this after loading the upgrade file. Clear File Name This does NOT stop the Restore process if it has started. It only clears the input for the "Restore Configuration File" field.
Status Screen . Figure 47: Status Screen Data - Status Screen System Device Name This shows the name of the Network Camera. Description This shows the description of the Network Camera, such as location. F/W version The version of the current firmware installed. Network MAC Address The current IP address of the Network Camera. IP Address The IP Address of the Network Camera. Network Mask The network mask associated with the IP address above.
Gateway The IP Address of the remote Gateway associated with the IP Address above. WINS Address The IP Address of the WINS server. Wireless WSC PIN Dode It displays the current WSC PIN code. Network Type This shows the Network Type currently in use (Ad-hoc or Infrastructure). SSID This displays the wireless SSID. Channel This shows the wireless channel currently used. Security The current security setting for Wireless connections. Signal Strength This shows the strength of the signal.
Log Screen This screen displays a log of system activity. . Figure 48: Log Screen Data - Log Screen Log System Log This is a log of system activity. Refresh Button Click this to update the data shown on screen. Clear Log Click this button to restart the log. Enable Syslog Service Check the box to enable the System Log Server feature. Syslog Server Address Enter the address of the Syslog Server.
Chapter 6 Troubleshooting 6 This chapter covers the most likely problems and their solutions. Overview This chapter covers some common problems that may be encountered while using the Network Camera and some possible solutions to them. If you follow the suggested steps and the Network Camera still does not function properly, contact your dealer for further advice. Problems Problem 1: I can't connect to the Network Camera with my Web Browser to configure it.
indicates that the Administrator has restricted access to specified users. Ask the Administrator for your User Name and Password. Problem 4 I can't connect to the Network Camera using a Wireless connection. Solution 4 1) If a LAN cable is connected to the LAN port, the Wireless interface is disabled. Only one interface can be active. 2) Check that your PC and the Network Camera have compatible Wireless settings. Mode (Infrastructure or Ad-hoc) must be correct. ESSID must match.
Appendix A Specifications A Network Camera Model RC8261 Dimensions 90mm (W) * 35mm (H) * 90mm (D) Built-in Speaker 8 ohm, 0.5W Built-in Microphone 6mm, -40 dB+3db Light Sensor Min low lux trigger value: 0.5 lux PIR Sensor Sensitivity distance: 5 meters Angle degree: 100°(cone) Focus distance: 6~9 meters Pan & Tilt Pan (310° / 4 seconds): left 155°, right 155° Tilt (120° / 1.5 second); up 90°, down 30° Image Sensor Omni Vision OV7725 1/3.75” CMOS Sensor Lens F 1.
Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Copyright Notice Many software components are covered by the GNU GPL (General Public License). Some are covered by other Licenses as listed in the table below. Details of each applicable license are contained in the following section. No Warranty THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
ntp-4.1.71 license Copyright (c) David L.
cron license Copyright (c) 1989 The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Paul Vixie.
GNU General Public License GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code.
the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8.
Lesser GNU General Public License GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
Appendix B Streaming Video/Audio B Solution Overview Streaming video is a sequence of "moving images" that are sent in compressed form over the Internet and displayed by the viewer as they arrive. With streaming, a Web user does not have to wait to download a large file before seeing the video or hearing the sound. Instead, the media is sent in a continuous stream and is played as it arrives.
