User's Manual

"ready" mode.

 WPS PBC Mode (Wireless Model Only). For the Network

Camera, when pressed and released (less then 3 seconds), the

Network Camera will be in the WPS PBC mode (Auto link

mode).

 WPS Pin Code Mode (Wireless Model Only). For the

Network Camera, when pressed and held for over 3 seconds, the

Network Camera will be in the WPS Pin Code mode.

 Reset to manufacturer default value and reboot. When

pressed and held over 10 seconds, the settings of Network

Camera will be set to their default values.

Note:

After this procedure is completed, the Power LED will blink three

times to confirm that the reset was completed successfully.

Package Contents

The following items should be included: If any of these items are damaged or missing, please

contact your dealer immediately.

1. Network Camera

2. Antenna (Wireless Model Only)

3. Power adapter

4. Installation CD-ROM

5. Quick Installation Guide