User's Manual
69
Main Screen
You can view live video in the main screen. The built-in software can let you view up to 9
cameras on a single computer screen at one central location.
The Icons allow you to control the cameras and video streams.
Channel (Camera) Selection.
Use this to select the desired Channel (Camera) by clicking on the top row.
This panel also indicates the status of the camera.
The first column indicates if the camera is available.
Green indicates the camera is available.
Gray indicates that the camera is currently unavailable.
The second column indicates if a recording is in progress.
Gray indicates no recording.
Red indicates recording is in progress.
The third column indicates if Motion Detection is in progress.
Gray indicates this feature is not enabled.
Yellow indicates Motion Detection is in progress.
The forth and fifth columns indicate if I/O port 1/2 is in On or Off
mode.
Gray indicates this feature is not enabled.
Yellow indicates I/O port is in On mode.
Alert Log List.
It displays the list of alert logs, if any.
Preset Position. Select the desired Preset position.
Refresh. Update the Preset position list. This has no effect unless during
the viewing session, another user or the Camera Administrator has renamed
one or more of the Preset positions.
Create Preset Points. Define (or re-define) a Preset position. The Camera
Administrator can choose whether or not this option is available.
Camera Patrol. Move through the Preset positions in the sequence defined
by the Camera Administrator.
Setup. Click this button to open the Setup Window.
Playback. Click this button to open the Playback, which allows you to
browse through the previously saved files.
Move Control. Use this to move the camera to the desired position. There
may a short delay after clicking the desired icon. You should wait a couple
of seconds rather than click again.
Channel Indicator. This indicates the current channel (camera).
Play. Use this to re-start viewing, after using the Stop or Pause button.
Pause. Use this to temporarily stop the connection to the camera