User's Manual

49
Set Patrol Sequence
Set Patrol Sequence
This feature determines how the camera will move when it is set to
"Rotate". You can set a number of Preset Positions; the camera will
go to the first position, then move through the list of present
positions until it is finished. The camera will stop at the last position
in the list.
To create the Preset Sequence, select the desired Preset Position in
the left column, and click the "Add >>" button. Repeat until the
desired sequence is complete. Note that you can add the same Preset
Position more than once; this can be used to make the camera stay
longer at one position.
To delete a position from the Sequence, select the desired position
and click the "Remove" button.
Time
This determines how long the camera will stay at each position
while executing the sequence. Set this to the desired value.