User's Manual

SerComm
96
privacy_button
Query
only
Privacy button status, valid values: [disabled|off|on]
pir
Query
only
PIR status, valid values: [disabled|actionless|active]
light_sensor
Query
only
Light sensor status, valid values: [disabled|night|day]
pt_position
Query
only
Query current Pan & Tilt position, because the MCU can’t get
response from PT, so the values maybe wrong under some
conditions. Format is “X,Y”
“X” is the Pan position; “Y” is the Tilt position.
input_1
input_2
Query
only
Input #1,#2 status, valid values: [high|low]
output_1
output_2
Get &
Set
Onput #1,#2 status,
Query format is “A,B”.
“A” valid values: [high|low]
“B” valid values: [pulse|static]
Control format is “A”.
“A” valid values: [high|low]
dn_mode
Get &
Set
Day/Night mode status, valid values: [day|night]
Day mode, IR LED off, IR cut switch close the window to
filter the IR lights.
Night mode, IR LED on, IR cut switch open the window not
to filter the IR lights.
ir_cut
Get &
Set
IR cut switch status, valid values: [close|open]
ir_leds
Get &
Set
IR LEDs status, valid values: [disabled|off|on], disabled is
only valid for query CGI
wl_leds
Get &
Set
White light LEDs status, valid values: [disabled|off|on],
disabled is only valid for query CGI
Control the peripheral components status
Method: GET
URL:
http://<ip>/io/control_pc.cgi?<parameter>=<value>[&<parameter
pair>…]
Parameter Value and description
Please refer to the “Parameter Pairs Table”
Return:
Successful request returns all group parameters or the specified parameters
as below.
HTTP/1.0 200 OK\r\n
…
content-type: text/plain\r\n