User's Manual

Chapter 4

Advanced Viewing Setup

This Chapter provides information about the optional settings and features for

viewing video via the Network Camera. This Chapter is for the Camera

Administrator only.

Introduction

This chapter describes some additional settings and options for viewing live Video:

• Adjusting the video image

• Controlling user access to the live video stream

• Making video available from the Internet

• Using the Motion Detection feature

Adjusting the Video Image

If necessary, the Network Camera Administrator can adjust the Video image.

To Adjust the Video Image:

1. Connect to the Web-based interface of the Network Camera. (See Chapter 5 - Web-based

Management for details.)

2. Select Administration, then Streamings. You will see a screen like the example below.

Figure 20: Streamings Screen