User's Manual

Chapter 5

Web-based Management

This Chapter provides Setup details of the Wireless Network HD Camera’s

Web-based Interface. This Chapter is for the Camera Administrator only.

Introduction

The Wireless Network HD Camera can be configured using your Web Browser. The Wireless

Network HD Camera must have an IP address which is compatible with your PC.

Connecting to Wireless Network HD Camera

 If using only your Web Browser, use the following procedure to establish a connection

from your PC to the Wireless Network HD Camera:

 Once connected, you can add the Wireless Network HD Camera to your Browser's

Favorites or Bookmarks.

Connecting using your Web Browser

1. Start your WEB browser.

2. In the Address box, enter "HTTP://" and the IP Address of the Wireless Network HD

Camera.

3. You will then be prompted for a username and password.

 If using the default values, enter administrator for the name, and leave the

password blank.

 Otherwise, enter the Administrator ID and Administrator Password set on the

Maintenance screen.