User's Manual

Wireless Network HD Camera Setup

The Wireless Network HD Camera configuration does NOT have to be changed, unless:

 You wish to change the port number from the default value.

HTTPS Port Configuration

Normally, HTTP (Web) connections use port 80. Since the Wireless Network HD Camera uses

HTTP, but port 80 is likely to be used by a Web Server, you can use a different port for the

Wireless Network HD Camera. This port is called the Secondary Port.

The default HTTP/HTTPS Secondary Port is 1025. If you prefer to use a different port number,

you can specify the port number on the Wireless Network HD Camera's Network screen, as

shown below.

Figure 11: Network Screen

See Chapter 5 - Web-based Management for further details on using the Network screen.

Viewers need to know this port number in order to connect

and view live Video, so you must inform viewers of the

correct port number.