User's Manual

Making Video available from the Internet

If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and

Broadband modem, you can make the Wireless Network HD Camera available via the Internet.

You will need to configure your Router or Gateway to allow connections from the Internet to

the camera.

Router/Gateway Setup

Your Router or Gateway must be configured to pass incoming TCP (HTTP) connections (from

Internet Viewers) to the Wireless Network HD Camera. The Router/Gateway uses the Port

Number to determine which incoming connections are intended for the Wireless Network HD

Camera.

This feature is normally called Port Forwarding or Virtual Servers, and is illustrated below.

The Port Forwarding/Virtual Server entry tells the Router/Gateway that incoming TCP

connections on port 1024 should be passed to the Wireless Network HD Camera. If necessary,

check the user manual for your Router/Gateway for further details.

Figure 10: Connecting via the Internet

The "Port" for the Port Forwarding / Virtual Server entry

above is the " Secondary Port" number specified on the

Network screen of the Wireless Network HD Camera.