User's Manual

Chapter 5

Web-based Management

This Chapter provides Setup details of the Wireless HD IP Camera’s Web-

based Interface. This Chapter is for the Camera Administrator only.

Introduction

The Wireless HD IP Camera can be configured using your Web Browser. The Wireless HD IP

Camera must have an IP address which is compatible with your PC.

Connecting to Wireless HD IP Camera

• If using only your Web Browser, use the following procedure to establish a connection

from your PC to the Wireless HD IP Camera:

• Once connected, you can add the Wireless HD IP Camera to your Browser's Favorites or

Bookmarks.

Connecting using your Web Browser

1. Start your WEB browser.

2. In the Address box, enter "HTTP://" and the IP Address of the Wireless HD IP Camera.

3. You will then be prompted for a username and password.

• If using the default values, enter administrator for the name, and leave the

password blank.

• Otherwise, enter the Administrator ID and Administrator Password set on the

Maintenance screen.