User's Manual

LAN port

Use a standard LAN cable to connect your Network Camera to a

10/100BaseT hub or switch.

Note:

• Plugging in the LAN cable will disable the Wireless interface.

Only 1 interface can be active at any time.

• The LAN cable should only be connected or disconnected when

the camera is powered OFF. Attaching or detaching the LAN

cable while the camera is powered on does NOT switch the

interface between wired and wireless.

Digital

Input/Output

The GPIO terminal block includes 1 input port and 1 output port.

Speaker out

If required, an external speaker can be plugged in here.

Package Contents

The following items should be included: If any of these items are damaged or missing, please

contact your dealer immediately.

1. Network Camera

2. Antenna (Wireless Model Only)

3. Power adapter

4. Installation CD-ROM

5. Quick Installation Guide