User's Manual

4
Physical Details - Network Camera
Front - Network Camera
Figure 2: Front Panel
White Light LEDs
These white LEDs are designed for the supply of backlighting while
under the low-light environments.
Light Sensor
The light sensor can be used to distinguish between light and dark,
as well as determine the intensity of the light.
Echo Cancellation
Echo cancellation can reduce background noise and remove hybrid
to provide better voice quality.
Lens
No physical adjustment is required or possible for the lens, but you
should ensure that the lens cover remain clean. The image quality is
degraded if the lens cover is dirty or smudged.
Microphone
The built-in microphone is mounted on the front.
Power LED
(Green)
On - Power on.
Off - No power.
Blinking - The Power LED will blink during start up. This will take
15 to 20 seconds.
Active LED
(Green)
Off - No user is viewing the camera.
Blinking - User(s) is viewing the camera.
Network LED
(Green, Amber)
On (Green) - Wireless or LAN connection is available.
Off - Wireless or LAN is not connected or camera is not
sending/receiving data.
Blinking (Green) - Data is being transmitted or received via the
LAN or Wireless connection.
On (Amber) - If the LED is on for 5 seconds, the WPS is not
processing successfully.
Blinking (Amber) - WPS function is being processed.
PIR Sensor
The PIR sensor is designed for human body detection.