User's Manual

5
4. Network/Wireless
LED
(Green, Amber)
On (Green) - Network (Wireless or LAN)
connection is available.
Off - Wireless or LAN is not connected or
camera is not sending/receiving data.
Blinking (Green) - Data is being transmitted
or received via the LAN or Wireless
connection.
On (Amber) - If the LED is on for 5 seconds
and then off, the WPS function is failed.
Blinking (Amber) - WPS function is being
processed.
5. Micro SD Card Slot
Insert the SD card into the slot for additional
storage if needed.
6. LAN port
Use a RJ-45 USB cable (optional) to connect
your camera to a 10/100BaseT hub or
switch.
Note:
 Plugging in the RJ-45 USB cable will
disable the Wireless interface. Only 1
interface can be active at any time.
 The RJ-45 USB cable should only be
connected or disconnected when the
camera is powered OFF. Attaching or
detaching the RJ-45 USB cable while the
camera is powered on does NOT switch
the interface between wired and wireless.