User's Manual

12
Appendix A
Specifications
Waterproof HD IP Camera
Model
Waterproof HD IP Camera
Dimensions
76mm (W) x 76mm (H) x 48.6mm (D) (without stand)
Operating
Temperature
-40 C to 50 C (Cold Start: -40ºC; Heater mode: -40ºC to
0ºC )
Video compression
H.264 and MJPEG
Image resolution
16:9 720p (1280*720)
4:3 XGA (1024*768), VGA (640*480), QVGA (320*240)
Mixed Mode (720p, VGA, QVGA)
Storage Temperature
-40 C to 70 C
Network Protocols
TCP/IP, HTTP, HTTPS, DHCP, UPnP, NTP, RTCP, DNS
Network Interface
1 RJ-45 USB connector for Ethernet (optional)
Wireless interface
IEEE 802.11n/802.11b/802.11g compatible, WEP 64/128
bit, WPA/WPA2 personal security support
Button
1 WPS/Network Button
LEDs
2
IR LED
2
Power Adapter
12V/1.5A, 100~240V
Regulatory Approvals
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
A