User's Manual

Chapter 1 Introduction
3
Power Interface
Connect the two wires of the supplied cable to the terminal
adapter. Do not use the other terminal adapters; doing so
may damage the camera.
Power Indicator
(Green, Amber,
Blue)
On (Green) - Power on.
Off – No power.
Blinking (Green) - The LED will blink during start up or
wireless connection is under association.
On (Blue) - Network connection is available (wired or
wireless).
On (Amber) - If the LED is on for 5 seconds and then turns
off, the WPS function has failed; or the heater is active.
Blinking (Amber) – The WPS function is active.
Note: If the data is being transmitted via WiFi/LAN, The
color of the LED is blue in the mean time.
Reset/WPS/Image Flip Button
Figure 2: WPS/Reset/Image Flip Button