User's Manual

Chapter 4 ADT Pulse Enrollment
16
If the Camera Continually Goes Offline
If after enrolling it the camera, it continually goes offline
(Power LED blinks continually), the camera will automatically
attempt to recover the wireless connection. If the camera
cannot recover on its own, take the following measures to
re-establish the Wi-Fi connection.
1. Power cycle the camera.
2. If the previous measure fails, move the gateway closer to
the camera, if possible.
3. If the previous measure fails, press the camera’s reset
button for15 seconds, and then re-enroll the camera into
Pulse.
4. If the previous measure fails, install a Wi-Fi Range
Extender model WN3000RPH-2ADPAS.