User's Manual

Chapter 4 ADT Pulse Enrollment
14
10. Press and hold the WPS/RESET/Image Flip button on the
camera for 5seconds to establish a wireless connection.
The Power LED flashes amber as the gateway attempts to
connect to the camera. The wireless connection is
successful when the Power LED turns solid green.
NOTE: You must complete the WPS connection within 2
minutes or else the process will time out. The time
remaining is displayed in the upper left portion of the
screen.
11. When the Camera Details screen appears, showing that the
camera has been enrolled, assign the camera a unique name
(usually based on the location of the camera) in the Name
field, and then click Save.