User's Manual

Chapter 4 ADT Pulse Enrollment
12
10. After the Camera has connected and the button is no
longer grayed out, click Continue.
11. Click Finish. The Pulse enrollment is complete.
12. Disconnect the camera from the Gateway and remove from
power.
13. Install the camera in its final location.
Using WPS with PIN to Enroll the Camera
1. Set up the camera, as described in the previous chapter.
2. Launch an Internet browser and log in to the Pulse portal
or TS installer app.
3. Enter the Manage Devices screen using one of these
methods:
l For the Pulse portal, select the System tab and click
Manage Devices.
l For the TS installer app, click the Pulse Devices link.
The Manage Devices screen displays.
4. In the Manage Devices screen, click Cameras.
5. Click the Add Using WPS button, located at the bottom of
the screen.