User's Manual

Chapter 3 Ceiling Mounting
8
CAUTION: Make sure to tighten up the three screws in order to
prevent water from the camera.
CAUTION: Be careful not to let the bubble cover the light
sensor and damage the LVDS cable while attaching the bubble
to the camera.
8. Connect the power cable to the terminal adapter.
l Screw the red wire onto the positive(+) terminal of the
terminal adapter.
l Screw the black wire onto the negative(-) terminal of the
terminal adapter.
9. Plug the terminal adapter into a power outlet.
10. Make sure the IP Camera is firmly fixed on the ceiling.
11. Verify that the camera is active on the wireless network
and is recognized by Pulse.
NOTE
NOTE: It is recommended to let a qualified
technician install the device.