User's Manual

Chapter 3 Ceiling Mounting
6
Figure 4: Removing the bubble from the Camera
4. If using the anchors, insert them into the mounting holes.
5. Align the three mounting holes of the camera stand with the
three holes and mount the camera stand on the ceiling using
the provided screws.
Figure 5: Ceiling Installation
NOTE
NOTE: It is recommended to route the cable
through the side opening of the mounting base.
6. The camera offers 3-axis adjustments:
l Loosen the tilt adjust screw to adjust the tile angle
(0°~70°).
l Adjust the pan angle (0°~330°) by holding the black liner.
l Use the lens to rotate (0°~350°) the camera.
Figure 6: Angle Adjustment