User's Manual

Chapter 3

Ceiling Mounting

This Chapter provides details for final ceiling

mounting of the IP Camera

Ceiling Mounting Installation

NOTE

NOTE: Ensure that the camera is configured and

enrolled in ADT Pulse before permanently

mounting it.

1. Locate an unused indoor outlet to plug into the terminal

adapter. The outlet should be located as close as possible

to the location where the camera will be permanently

mounted.

CAUTION: Do not plug in the terminal adapter until all the

connections are completed and the camera is fully mounted.

2. Identify the location where you would like to mount the

camera. And then drill three holes on the ceiling based on

the mounting template (last page).

3. Remove the sponge from the camera. And then use the L tool

to remove the three screws and the bubble from the camera.