Quick Start Guide

Setup the IP3442M

You can set up your IP3442M using web browser.

Setup Using Web Browser

Step 1: Make sure the WiFi router is on and working properly.

Step 2: Connect the Router WAN port with your cable modem or PON device

with an Ethernet cable.

Step 3: Connect an Ethernet cable to the Router and your PC.

Step 4: Launch the browser and enter http://192.168.1.1 in the Address box.

Step 5: You will be prompted for a username and password. Use the default

values, admin for the username, and WPS PIN for the password by scanning

the QR code in your WiFi credential card.

Step 6: Choose the Wireless page, click Basic Setup, you can set your WiFi

name and password .

2 2