Quick Start Guide

Back Panel

Figure 2: Back Panel

1. LAN port*3

Connect to a PC or other Ethernet device using a

standard Ethernet cable.

2. WAN port

Connect to a cable modem or PON using a standard

Ethernet cable.

3. Reset Button

This button is recessed; a pin or paper clip can be

used to press it. The button can be used while the

unit is powered and the power LED is Green.

 Reset to manufacturer default values and reboot.

When pressed and held over 7 seconds, the

settings of the IP3442M will be set to their default

values.

 Reboot. When pressed and held over 2 seconds

and less than 5 seconds, the IP3442M will

reboot.

4.USB port

Power charging for smart phone or pad.

5. DC Jack

 Connect to power with the accessory power

adapter.