Quick Start Guide

2
Chapter 2
Basic Setup
This chapter provides details on how to setup the IP3442M
Front Panel
Figure 1: Front Panel
1. Power/WAN
(Green/Red)
Red On, Green off – No internet.
Blink Red,Green off - The Power LED will blink(Red)
during boot up
Green On, Red off-Internet connection is available.
Interleave Red and Green-FW upgrade
Off - No power.
2. WiFi/ WPS LED
(Blue/Green)
Green On-Wireless enable.
Green off-Wireless disable
Blue Slow blink, Green off - WPS is pairing. When
WPS button is pressed, the LED will be blinking for 2
minutes.
Blue Off - WPS feature is not in use.
Blue On - WPS failure. Keep light for 10 seconds
Blue off,Green off-During boot up
3. LAN LED (Green)
On (Green) - LAN connection is available.
Off - LAN is not connected.
Blinking-The traffic is running
2