User's Manual

46
Pan/Tilt Screen
This screen is displayed when the Pan/Tilt option on the Video & Audio menu is clicked.
Figure 23: Pan/Tilt Screen
Data - Pan/Tilt Screen
Pan/Tilt
Patrol
Select desired option for the patrol function.
Preset Point
Position
Click this button to define the preset point position.
Set Patrol Sequence
Set Patrol Sequence This feature determines how the camera will move when it is set to
either "Once" or "Always" rotate. You can set a number of Preset
Positions; the camera will go to the first position, then move through
the list of present positions until it is finished. The camera will stop
at the last position in the list.
To create the Preset Sequence, select the desired Preset Position in
the left column, and click the "Add >>" button. Repeat until the
desired sequence is complete. Note that you can add the same Preset
Position more than once; this can be used to make the camera stay
longer at one position.
To delete a position from the Sequence, select the desired position
and click the "Remove" button.
Time This determines how long the camera will stay at each position
while executing the sequence. Set this to the desired value.