User's Manual

29
Data - Network Screen
Network
Internet Connection
Type
There are 3 connection types:
• Obtain Address Automatically (DHCP): If selected, the
iCamera2 will obtain its IP address and related information
from a DHCP Server. Only select this option if your LAN has a
DHCP Server.
• Static IP Address: If selected, you must assign the following
data to the iCamera2.
• IP Address - Enter an unused IP address from the address
range used on your LAN.
• Subnet Mask - Use the same value as PCs on your LAN.
• Default Gateway - Use the same value as PCs on your
LAN.
• PPPoE (PPP over Ethernet): This is the most common login
method, widely used with DSL modems. Normally, your ISP
will have provided some software to connect and login. This
software is no longer required, and should not be used.
• Username - The user name (or account name) provided by
your ISP.
• Password - Enter the password for the login name above.
Obtain DNS server
address
automatically
If selected, the iCamera2 will use the DNS address or addresses
provided by the DHPC server.
This option is only available if the IP address setting is Obtain an
IP address Automatically.
Use the following
DNS server address
Primary DNS server - Use the same value as PCs on your LAN.
Normally, your ISP will provide this address.
Secondary DNS server - This is optional. If entered, this DNS will
be used if the Primary DNS does not respond.