User's Manual

Chapter 5

Web-based Management

This Chapter provides Setup details of the iCamera2’s Web-based Interface.

This Chapter is for the Camera Administrator only.

Introduction

The iCamera2 can be configured using your Web Browser. The iCamera2 must have an IP

address which is compatible with your PC.

Connecting to iCamera2

• If using only your Web Browser, use the following procedure to establish a connection

from your PC to the iCamera2:

• Once connected, you can add the iCamera2 to your Browser's Favorites or Bookmarks.

Connecting using your Web Browser

1. Start your WEB browser.

2. In the Address box, enter "HTTP://" and the IP Address of the iCamera2.

3. You will then be prompted for a username and password.

• If using the default values, enter administrator for the name, and leave the

password blank.

• Otherwise, enter the Administrator ID and Administrator Password set on the

Maintenance screen.