User's Manual

Chapter 4

Advanced Viewing Setup

This Chapter provides information about the optional settings and features for

viewing video via the iCamera2. This Chapter is for the Camera

Administrator only.

Introduction

This chapter describes some additional settings and options for viewing live Video:

• Adjusting the video image

• Controlling user access to the live video stream

• Making video available from the Internet

• Using the Motion Detection feature

Adjusting the Video Image

If necessary, the iCamera2 Administrator can adjust the Video image.

To Adjust the Video Image:

9. Connect to the Web-based interface of the iCamera2. (See Chapter 5 - Web-based

Management for details.)

10. Select Administration, then Streamings. You will see a screen like the example below.

Figure 9: Streamings Screen

11. Make the required adjustments, as explained below, and save your changes.