User's Manual

9
Wall Mounting
*Note: Please ensure that the iCamera2 is configured and added to the network before
permanent mounting.
1. Using hands to remove the plate from the bottom of the stand.
2. Place the plate in the desired position of the wall. Screw three screws into ceiling through
the holes of the plate.
3. Attach the stand to the plate.
4. Connect the LAN cable into the LAN port of the device. Turn the iCamera2 clockwise to
attach it to the stand.
5. Connect the other end of the LAN cable to the adapter through the holes of the stand.
Adjust it to the desired position and secure the iCamera2 firmly.