User's Manual

DRG600WiFi User Guide
A
dministrati
o
Page 95 of 104
Upgrade Firmware screen
The firmware (software) in the DRG600-WiFi can be upgraded using your Web Browser.
You must first download the upgrade file, then select Upgrade Firmware on the Administration
menu. You will see a screen like the following.
Figure 48. Upgrade firmware screen
Upgrade Firmware
File Name Enter the file name of firmware that you want from Remote Server.
Remote Server
Address
Enter the IP Address of Remote Server which stores the firmware file.
Get Upgrade
File
Click this button, DRG600-WiFi will get firmware file from remote
server and use it to operate by reboot.
To perform the Firmware Upgrade:
1. Click the Browse button and navigate to the location of the upgrade file.
2. Select the upgrade file. Its name will appear in the Upgrade File field.
3. If you have set a configuration password, enter it. If not, leave the field blank.
4. Click the Start Upgrade button to commence the firmware upgrade.
The DRG600-WiFi is unavailable during the upgrade process, and must restart when the
upgrade is completed. Any connections to, or through, the DRG600-WiFi will be lost.