User's Manual

DRG600WiFi User Guide
A
dministrati
o
Page 93 of 104
Local Administration screen
This feature allows you to manage the DRG600-WiFi via the LAN port.
Figure 47. Local Administration Screen
Local Administration
Enable Local
Management
Check to allow adminstration/management via local LAN. (To connect, see
“Port Number” below).
If Disabled, this device will ignore Administration connection attempts from
local LAN.
Port Number
Enter a port number between 1024 and 65535. The default value is 80. .
The port number must be specified in your Browser when you have changed it.
To specify the port number :
1. Start your Browser.
2. In the "Address" or "Location" field, enter the IP address of this
device, followed by the port number, as follows:
http://ip_address:port_number
where:
ip_address is the IP address of this device.
port_number is the port number assigned on this screen.
You should then be prompted for the password for this device. (You
must assign a password!)