User's Manual

DRG600WiFi User Guide
A
dministrati
o
Page 90 of 104
Clear Log button
Use this to restart the required log. This makes it easier to read the latest
entries.
EMail Reports
Send E-mail alert
immediately when
attacked
If enabled, an E-mail will be sent immediately if a DoS (Denial of Service)
attack is detected. Note that if this is enabled, the E-mail address
information must be provided.
E-mail logs
Enable the logs you wish to send:
Connection log - If selected, Outgoing Connection log will be sent.
Access Control log - If selected, Access Control log will be sent.
If no checkboxes are enabled, no logs will be sent.
EMail Address
E-mail Address
Enter the E-mail address the Log is to be sent to. The E-mail will also
show this address as the Sender's address.
Subject Text to be added to subject field in email message.
SMTP Server
Enter the address (domain name) or IP address of the SMTP (Simple
Mail Transport Protocol) Server you use for outgoing Email.
Port No.
Enter the port number used to connect to the SMTP Server. The default
value is 25.