User's Manual

DRG600WiFi User Guide PC Configuration
Page 53 of 104
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the DRG600-WiFi's Access Point, regardless of the
operating system which is used on the client.
To use the Wireless Access Point in the DRG600-WiFi, each Wireless Station must have compatible settings, as
follows:
Mode The mode must be set to Infrastructure.
SSID (ESSID) This must match the value used on the DRG600-WiFi. The default value is printed
on a label on the DRG600-WiFi.
Note! The SSID is case sensitive.
Wireless By default, Wireless security on the DRG600-WiFi is enabled with WPA-PSK and
the passphrase is printed on a label on the DRG600-WiFi.
Security If Wireless security is disabled on the DRG600-WiFi, all stations must have wireless
security disabled.
If Wireless security is enabled on the DRG600-WiFi, each station must use the same
settings as the DRG600-WiFi.
.