User's Manual

DRG600WiFi User Guide PC Configuration
Page 50 of 104
4. Click on the Properties button. You should then see a screen like the following.
Figure 26. TCP/IP Properties (Windows XP)
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting.
Using this is recommended. By default, the DRG600-WiFi will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the DRG600-WiFi.
Using a fixed IP address
If your PC is already configured with a fixed IP address, select the radio button Use the following IP address:.
Check with your network administrator before making the following changes.
1. In the Default gateway field, enter the DRG600-WiFi's IP address and click OK.
2. If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the DNS address
or addresses provided by your ISP, then click OK.