User's Manual

DRG600WiFi User Guide PC Configuration
Page 48 of 104
4. Click on the Properties button. You should then see a screen like the following.
Figure 24. TCP/IP Properties (Win 2000)
5. Ensure your TCP/IP settings are correct, as described below.
Obtain an IP Address automatically
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting.
Using this setting is recommended. By default, the DRG600-WiFi will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the DRG600-WiFi.
Use the following IP Address
If your PC is already configured with a fixed IP address, select the radio button Use the following IP address:.
Check with your network administrator before making the following changes.
1. Enter the DRG600-WiFi's IP address in the Default gateway field and click OK.
2. If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the the IP address
of DRG600-WiFi or the DNS address provided by your ISP, then click OK.