User's Manual

DRG600WiFi User Guide PC Configuration
Page 45 of 104
Specify an IP Address
If your PC is already configured, check with your network administrator before making the following changes.
The Default Gateway must be set to the IP address of the DRG600-WiFi. To set this:
1. Click the Advanced button on the screen above.
2. On the following screen, click the Add button in the Gateways panel, and enter the DRG600-WiFi's IP
address, as shown in Figure 19 below.
3. If necessary, use the Up button to make the DRG600-WiFi the first entry in the Gateways list.
Figure 21. Windows NT4.0 - Add Gateway