User's Manual

DRG600WiFi User Guide PC Configuration
Page 41 of 104
Checking TCP/IP Settings  Windows 9x/ME:
1. Select Control Panel - Network. You should see a screen like the following:
Figure 15. Network Configuration
2. Select the TCP/IP protocol for your network card.
3. Click on the Properties button. You should then see a screen like the following.
Figure 16. IP Address (Win 95)
Ensure your TCP/IP settings are correct, as described in the following sections:
Using “IP Address” (DHCP)
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting.
Using this is recommended. By default, the DRG600-WiFi will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the DRG600-WiFi.