User's Manual

DRG600WiFi User Guide Setup
Page 35 of 104
Wireless Security  WEP
Figure 10. Figure 8: WEP Screen
WEP
Authentication
Normally this can be left at the default value of "Auto". If that fails, select the
appropriate value - "Open System" or "Shared Key." Check your wireless card's
documentation to see what method to use.
Key Size
Select the WEP Encryption level:
• 64-bit (sometimes called 40-bit) encryption
• 128-bit encryption
Passphrase
Enter a word or group of printable characters in the Passphrase box and click the
"Generate " button to automatically configure the WEP Key(s). If encryption
strength is set to 64 bit, then each of the four key fields will be populated with key
values. If encryption strength is set to 128 bit, then only the selected WEP key
field will be given a key value.
Key 1-4
Use the radio buttons to select the default key.
Enter the key value you wish to use. Other stations must have the same key values.
Keys must be entered in Hex. Hex characters are the digits (0 ~ 9) and the letters A
~ F.